Touch Panel RGB Iron Shell 5 Keys Controller LED Lighting Controller DC12~24V
Product Specifications
RF Touch 5 Key LED Controller
Model No.:FC-T2H-R5Q
Product Description:
This FR touch remote control RGB controller adopted the advanced touch technology, Mainly used to control all kinds of constant volage led products, such as LED source, flexible strip, wall washer, glass curtain wall light and so on. User can choose different changing mode, adjust the speed and brightness,turn on/off by the remote control according to their preference .This controller is with power off memory function, next time to used it, will start with the model it save. Its builtin 7 kinds of static color, jump, fade, strobe,flow, automatic cycle and others effect. Agile wiring, easy connection and simple to used is the representative advantages of this controller.
Technical Parameters
Working temperature
|
-20-60℃
|
Supply voltage
|
DC12V~24V
|
0utput
|
3 channels
|
Connecting mode
|
common anode
|
External dimension
|
L81×W64×H24mm
|
Remote control size
|
L137×W80×H25mm
|
Net weight
|
170g
|
Gross weight
|
180g
|
Static power consumption
|
<1W
|
Output current
|
<6A(each channel)
|
Output power
|
12V<216W;24V<432W;
|
Remote control function:
Key 1:ON/OFF
Key 2:light changing mode(Total 14 modes)
Key 3:color light/white light switching mode
Key 4:brightness/speed+
Key 5:brightness/speed-
Direction for use
Function introduction:
1.Use the RF remote control, no need to make the remote direct to th e controller,and the RF remote can controlled it across obstacles.
2.In the open area remote control distance is over 30 meters;
3.the controller is full touch remote with color right on it , user c an change the color simply by touch the color ring.
Operation method:
Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between
connecting wire before you turn on the power;
Just the ON key is valid in OFF condition, to turn on the controller by press the ON key for the first time.
the controller will be in the same mode as last time it save.
In on condition,press the Key 2 can be realize the 15 kinds of changing mode as follows:
NO.
|
Mode
|
remark
|
1
|
three color jump
|
|
2
|
seven color jump
|
3
|
three color fade
|
4
|
Seven color fade
|
5
|
Red strobe-flash
|
6
|
Green strobe-flash
|
7
|
blue strobe-flash
|
8
|
yellow strobe-flash
|
9
|
Cyan strobe-flash
|
10
|
Purple strobe-flash
|
11
|
White strobe-flash
|
12
|
Red-blue fade
|
13
|
Green-blue fade
|
14
|
Red-Gree fade
|
|
|
1.Press Key 3 once to activate white light mode.when switch to the static color,can be touch the color ring to realize the color you want.
2.If you want to adjust the brightness of color ring , first please switch 3 key (it will be realize white color), then press 4 or 5 key to adjust brightness+/bright- to realize the brightness you want.finally,switch 3 key and the beightness will be you adjusted.
3.In dynamic mode, can be press the key 4 or key 5 to adjust the changing speed.